|
|
|
|
|
 |
|
|
|
|
|
|
 |
||||||||||||||||||||||||||
|
||||||||||||||||||||||||||
|
TTR 5000 - Video and Audio Matrices Video and Audio Matrix Analogue Matrix Routing Switcher, Video and Audio Matrix, Broadcast Video Matrix, Broadcast Video Matrices, Broadcast Audio Matrix, Broadcast Audio Matrices, AV Matrix, Broadcast AV Matrix, Broadcast AV Matrices, Video Matrix, Video Matrices, Video Switcher, Video Switchers, Video Router, Video Routers, Audio Matrix, Audio Matrices, Audio Switcher, Audio Switchers, Audio Router, Audio Routers, Matrix Routing Switcher, Matrix Routing Switchers, Routing Switcher, Routing Switchers, Routing Matrix, Routing Matrices, Matrix Routing, Analogue Video Matrix, Analogue Audio Matrix, Broadcast Video and Audio Matrix, Broadcast Video & Audio Matrix, Broadcast Audio Matrices, Broadcast SDI Digital Matrix, Broadcast SDI Digital Matrices, Broadcast Serial Digital Matrix Features
BROADCAST ANALOGUE VIDEO AND AUDIO MATRICESThe TTR5000 Serial Digital Video and Audio matrix is a compact, competitively priced unit with a wide range of facilities only normally found in higher cost units. Housed in a 1U frame, the basic matrix is a 16 x 2 video with a breakaway AES/EBU stereo audio level. Local control, terminating inputs and dual outputs for video are provided as standard. Optional extras include a remote control panel, regenerated looping inputs, reclocking on outputs, and a status display programme that runs on a PC. The unit accepts an analogue reference input to provide switching during the vertical interval. This type of matrix is ideally suited for edit suites or any local monitoring position, e.g. a CAR area or a lines recording area. Options are available for smaller matrices, e.g. 4 x 1, 8 x 2, 16 x 1 etc., whilst larger matrices may be built-up by stacking the units, making use of the optional looping video inputs and the access to the data bus which is provided at the rear of the units. Local control of the matrix is provided by dual LED push-buttons mounted on the front panel of the unit. Married and breakaway selection is provided, with indication given by the dual LEDs, i.e. video, audio or married selections are shown, respectively, by the Red, Green, or both LEDs being on. The same arrangement is provided on the optional remote control panel, connection to which is via an RS422 serial link Specification
Specification subject to change without notice.
TTR 9000 - Video and Audio Matrices Video and Audio Matrix
Features
BROADCAST ANALOGUE VIDEO AND AUDIO MATRICESThe TTR9000 Series Video and Audio Matrices provide a very flexible, compact and cost effective switching system, designed to broadcast specification. The system allows for a wide range of matrix sizes and a comprehensive range of control facilities to meet most requirements. The system is based on two standard Eurocard module mothercards - a single width 8 x 2 card and a double width 16 x 8 card. Audio crosspoint, video crosspoint, or input buffer daughter cards are assembled on these two mothercards to build up matrix modules. Larger routing switchers are made up by combining these modules to increase the numbers of inputs and outputs as required. In this way, matrices from 8 x 1 up to 32 x 32 may be assembled. The basic building block of the system is the CMOS crosspoint element, which with its low on resistance and high off resistance, provides excellent performance figures. The flexibility of the TTR9000 series matrices make them ideal for custom built systems. Special units have been supplied which range from a simple 2 x 1, in a small ABS box, to a 64 x 64 RGBS and balanced audio matrix in a 6U rack unit. For video matrices, inputs can be looping or terminating and outputs from each bus can be single or dual as required. For audio matrices, inputs can be balanced or unbalanced as required. For a simple system, e.g. an 8 x 1 audio and video matrix housed in a 1U rack unit, control can be provided by a button per crosspoint mounted on the rack unit front panel - an arrangement that would be ideal for an edit suite or dubbing theatre monitoring matrix. For larger systems, e.g. a 16 x 8 video plus two audio matrix, housed in a 6U rack unit, control could be via an X-Y selection system either mounted on the rack unit front panel or supplied on a separate remote panel - an X-Y selection system involves a pre-set and take operation with LED/LCD displays to show the destination selected. Remote control of a matrix is also possible via RS232 or RS422, requiring the addition of an optional interface card. Control software can be supplied if required. Specification
Specification subject to change without notice. TR Ltd 84 Bridge Road, Chertsey, Surrey KT16 8LA. England. Telephone: +44 (0) 1932 564063 Fax: +44 (0) 1932 885182 E-mail: Sales@ttr.co.uk |
